BMNVN - FLEXTRON WHITE, 2350/SOP

  • MSDS: BMNVN
  • Manufacturer: PARKER PAINT
  • Product Name: FLEXTRON WHITE, 2350/SOP
  • National Stock Number: 8010-00N024761
Product Identification

Product ID:FLEXTRON WHITE, 2350/SOP
MSDS Date:01/25/1989
FSC:8010
NIIN:00N024761
MSDS Number: BMNVN

Responsible Party
PARKER PAINT
TACOMA, WA 98411-0047
US

Emergency Phone: 206-473-1122

Info Phone: 206-473-1122

Preparer: J. BURNWORTH

Cage: 9H480

Contractor
PARKER PAINT
11047 TACOMA, WA 98409 US

Telephone: 253-473-1122

Cage: 9H480

Ingredients

0.1@68F

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 2.63%

OSHA PEL 50 PPM, C

ACGIH TLV: 50 PPM,VAPOR, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 4%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


SILICONE DIOXIDE; (DIATOMACEOUS SILICA)

CAS: 68855-54-9

Fraction By Weight: 4%

OSHA PEL 0.08 MG/M3

ACGIH TLV: 10 MG/M3 TDUST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: OVEREXP MAY CAUSE HDCH, NAUS,
SKIN AND EYE IRRIT. CHRONIC:UNPROTECTED OVEREXP TO MISTS FROM SPRAY
APPLICATION MAY CAUSE LUNG DISEASE (SILICOSIS). INHAL OF HIGH
CONCENTRATIONS OF VAPORS MAY CAUS E HDCH, NAUS AND IRRITATION OF
NOSE, THROAT, AND LUNGS. EYE CONTACT MAY CAUSE IRRIT/BURN OF EYES.
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:CRYSTALLINE SILICA (QUARTZ) IARC-GROUP
2A; NTP GROUP 2.
Effects of Overexposure:HLTH HAZ:REPEATED LIQUID CONTACT MAY CAUSE SKIN
IRRITATION AND DERMATITIS. SKIN ABSORPTION:NONE KNOWN AT THIS TIME.
SWALLOWING CAN CAUSE GI IRRIT, NAUS, VOMIT AND DIARR. VOMIT CAN
RESULT IN ASPIRATION OF MATERIAL INTO LUNGS WHICH CAN
CAUSECHEMICAL PNEUMONITIS.
Medical Cond Aggravated by Exposure:NONE KNOWN AT THIS TIME.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED, APPLY
ARTF RESP. CONSULT PHYS. EYE:WASH WITH CLEAN WATER FOR AT LEAST 15
MIN. CONSULT PHYS. SKIN:WASH AFFECTED AREA WITH SOAP AND WATER.
REMOVE CON TAMINATED CLOTHING. CONSULT PHYS. INGEST: DRINK 1 OR 2
GLASSES OF WATER TO DILUTE. CONSULT PHYS OR POISON CONTROL CENTER
IMMED.

Fire Fighting

Lower Limits:3.2
Upper Limits:15.2
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILDUP AND EXPLOSION WHEN EXPOSED
TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:VENTILATE AREA. PREVENT SKIN AND EYE CONTACT
AND BREATHING OF VAPOR. CONTAIN AND REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 200F.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
CHILDREN.

Exposure Controls

Respiratory Protection:NOT REQUIRED FOR BRUSH AND ROLL APPLICATION. FOR
SPRAY APPLICATION, WEAR NIOSH/MSHA APPROVED PROPERLY FITTED (TC-23)
VAPOR/ PARTICULATE RESPIRATOR UNTIL ALL VAPORS AND SPRAY MIST ARE
EXHAUSTED.
Ventilation:PROVIDE SUFFICIENT VENT IN VOL & PATTERN TO KEEP AIR CONTAM
CONC BELOW APPLIC OSHA PEL/ACGIH TLV OCCUP EXPOS LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORK GOG OR FULL LNGTH FSHLD.
Other Protective Equipment:COVERALLS, HOOD ARE RECOMM DURING SPRAY
APPLICATN. PROT CREAMS MAY BE USED FOR EASE OF CLEANUP, NOT FOR
PROTECTION.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING THE RESTROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE INGRED
Vapor Density:LTR/AIR
Spec Gravity:1.3
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE COLORED LIQUID WITH AMMONIACAL ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN AT THIS TIME.
Stability Condition to Avoid:DO NOT HEAT ABOVE 200F.
Hazardous Decomposition Products:NONE KNOWN AT THIS TIME.

Disposal

Waste Disposal Methods:DO NOT ALLOW MATERIAL TO CONTAMINATE GROUND
WATER SYSTEMS. ABSORB LARGE SPILLS WITH SAND, CLAY, OR DIATOMACEOUS
EARTH. DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL DISPOSAL
REQUIREMENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.